Every week I like to share a few things I find interesting. Mostly video content with an occasional website article. All of the content you will find in these posts is free to you. Remember that liking, subscribing, or sharing free content goes a long way in helping produce more free content. If you like that creator’s work, share it! Also, thank you to those who send me links through the week when you find something really interesting.
Wesley Inglis
I like this mix of materials. the table top lets you see everything on the shelf below making the lower profile shelf more practical. Great build with nice straight lines.
Subscribe to Wesley Inglis: https://www.youtube.com/channel/UCSTVVGux21s1PyauIAdsJHw
Rob Cosman
Flattening stock wider than your jointer. This is a good hand plane lesson.
Subscribe to Rob Cosman: https://www.youtube.com/channel/UCqp8oXLR84eiryfhNXK-nTA
Ian Slatas
Do you have a timber slick? Id like to find one after watching this.
Subscribe to Ian Slatas: https://www.youtube.com/channel/UCwDD0ayVF7XekX4rVKRapag
Pask Makes
I love the hub he chose for the vise. The wheel adds a lot of character.
Subscribe to Pask Makes: https://www.youtube.com/channel/UCNyGbxoEo6CQvaRVEvItxkA
Onrust!
Woah….this is one heck of a conversion..
Subscribe to Onrust!: https://www.youtube.com/watch?v=xeMT1d_L-hw
https://www.youtube.com/channel/UCNdDV4vHKjuWOYlEW4HIk5w
Patrick Ashley
One of the better “single 2×4” builds I’ve seen..
Subscribe to Patrick Ashley: https://www.youtube.com/channel/UCmExNuyWrobCBbeYV-2Cycw
Torbjörn Åhman
Time slipped by while watching this man work. Shop noises are so peaceful sometimes.
Subscribe to Torbjörn Åhman: https://www.youtube.com/channel/UCSFaYYQzNMLo2U6rSNLpghg
Szilard Pinter
Probably the best looking raised panels I’ve seen cut on the table saw. I also like how he used his vise to start his panel glue up.
Subscribe to Szilard Pinter: https://www.youtube.com/channel/UCGnnwBQ52bskFwsMB8bC3og
Doug Outside
Carving and Coffee. Another relaxing video if you’ve got some time to kill.
Subscribe to Doug Outside: https://www.youtube.com/channel/UC-eOXKXJ2GQ1gewivwNxYKQ
HomeMade
Making homemade C-clamps from materials he had on hand. Not everyone has this kind of material lying around but the video is more of an example of being resourceful.
Subscribe to HomeMade: https://www.youtube.com/channel/UC4jLoXeW0KovdJKA5itFDSA
Ace Tree Management
Thats a big tree…
Subscribe to Ace Tree Management: https://www.youtube.com/channel/UC3LW9cUu3Sm5I9GOBsY9zvg
Just wanted to say thanks for these videos. I look forward to them every Saturday.
By the way, if you like forging videos you should check out Alec Steele on you tube, he’s not quite as quiet but fun to watch.
Thanks again
Hi Jay,
Really enjoy getting your email and watching the videos. Awesome selection.
Thanks, Sam
This really is the highlight of my week. I look forward to this email. Thanks!