Every week I like to share a few things I find interesting. Mostly video content with an occasional website article. All of the content you will find in these posts is free to you. Remember that liking, subscribing, or sharing free content goes a long way in helping produce more free content. If you like that creator’s work, share it! Also, thank you to those who send me links through the week when you find something really interesting.
Paoson WoodWorking
Shop engineering as usual with this channel. This time a tilting jointer fence. It’s been fun following his channel over the years. Almost every tool in his shop is homemade.
Subscribe to Paoson WoodWorking: https://www.youtube.com/channel/UC4PI8VEr1ZaKn4TBcXoy3qg
Heath Knuckles
B…E…A…Utiful! Stabilized maple burl turned into a hollow form on the lathe. I’ve been getting the turning itch a bit lately so it was nice to see this one in my inbox yesterday.
Subscribe to Heath Knuckles: https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ
Tom Strong Reviews
Here’s a little mind trip for you. Can you figure it out?
Subscribe to Tom Strong Reviews: https://www.youtube.com/channel/UC1itkXgauC74rZhf1rxosHA
Living Big In A Tiny House
I think I could live in a tiny home. Living in a tiny home on a pond sounds even more fun. Guaranteed to never have typical foundation issues haha.
Subscribe to Living Big In A Tiny House: https://www.youtube.com/channel/UCoNTMWgGuXtGPLv9UeJZwBw
kennyearrings1
Have you ever had the need for wooden threads and wooden nuts? I’ve seen quite a few solutions to get you there but haven’t seen this one yet.
Subscribe to kennyearrings1: https://www.youtube.com/channel/UCJlX2V2SHUvbQEFdyQHoTSA
Jake Thompson
I met Jake last year in Oklahoma. He’s a great guy and has an interesting project here. One of the more interesting sharpening stations I’ve seen. Do you see the irony in using a CNC to make a hand tool sharpening station?
Subscribe to Jake Thompson: https://www.youtube.com/channel/UCwbwXJk-BPA-052jig9gmpw
thewoodworkingshows
Alex Snodgrass doing what he does best. I recently switched out the blade on my bandsaw and saw this video the day before. Taking the table off made a HUGE difference. It’s just two knobs holding it on. Lots of little tips and tricks in this video. Bookmark it for future bandsaw reference.
Subscribe to thewoodworkingshows: https://www.youtube.com/channel/UCPFnMDaLyIKxyWSfGa81bsA
WoodWorkWeb
Colin shows an interesting way to use a custom router base for making designs on cabinet doors.
Subscribe to WoodWorkWeb: https://www.youtube.com/channel/UCMd9JgqSESwyuOs0yuSTlEw
Colin followed up that video with this one. More design panels.
Great website. Really enjoy your Saturday morning Interesting Topics where you can choose what you want to watch. Also benefit greatly from your woodworking videos. Again, great site, great projects, and great teacher! Thanks
Loved the bandsaw clinic with Alex Snodgrass.
Thanks for the mention Jay. I told my Daughter that I would probably get some ribbing from using the cnc to make a hand tool sharpening station. A little ribbing makes it fun!
Those router design ideas are fantastic,
Thanks!
Great site. Wonderful content.
Congratulations to you and your wife on the recent beautiful addition to your family.