This plan is in collaboration with April Wilkerson of Wilkerdos.com. The project was designed by April and the plan created by me.
The plans are in both imperial and metric units. If you are interested in a set of plans they can be found by CLICKING HERE.
Loved this project and all your builds. Always look forward to your next posts.
Do you have a set of plans from your miter saw table. Anything would be thankful.
Thanks Robert
Robert are you referring to my stand or Jay’s? If you’re asking about mine, I have a set of plans on my own site here: http://bit.ly/2pwceVy
Loved it, the problem is I showed my wife, now she wants one.
;) Great time to earn some sweet points and surprise her!
Very nice April.
Fun to see all of the Rockler stuff you have in use. Maybe the the Frisco store will have a 1 year celebration and invite you back,
I’m sure if you were to write in and request for one they would be willing. : ) I would love to do something in the DFW area again.
Great project !
Where did you get the pillows ?
What size of chain did you use ?
Thanks
I used chain that was rated at 250lbs but you can change that of course if you need more or less. I purchased the cushions at what use to be called Garden Ridge, but is now called AtHome. They have a huge selection of the same size cushions in toooons of different colors and patterns so you aren’t limited at all. : )
April
Thanks for your response.
I have another question: Where did you get your Right Angle Jig ?
Thanks again.
John
Wonderful idea April loved the work….Rusty
Cool! Always love the stuff that you, Jay & Nick do.
Like the project, but concerned about the material used . Won’t the pine rot over a little bit of time or is the paint enough to protect the wood ? I used pressure treated to make one in the past but had an issue with the wood warping .
The paint will do a lot to prevent rot. What accelerates rot is when wood is in contact with the ground.
Ok thanks for the feedback Jay ! Love your work dude !