📙Plans here: https://jayscustomcreations.com/product/matchfit-work-horse-plan/
📝 Save 10% on all MicroJig products with code JayMicrojig10:
→ Microjig MATCHFIT™ 1.5″ Dovetail Track Hardware (4-Pack) https://lddy.no/ylxv
→ Cork Rubber Vise Jaw Lining 5-7/8” wide x 36” long x 1/8” thick https://lddy.no/ylyi
→ Microjig DVC-538K2 MATCHFIT Dovetail Clamps Set of 2 https://lddy.no/ym7d
→ 10-32 x 12″ Long Threaded Rod https://lddy.no/ymcd
→ MATCHFIT Clamp 1/2″ Diameter 14 Degree Router Bit https://lddy.no/ymce
→ Alternative less expensive 14 degree dovetail router bit https://lddy.no/ymcf
→ Push Pull Toggle Clamp https://lddy.no/ymdo
💰 Coupons to save you money 💰
💲 – Use the code JAYBATES to save 10% on your router/cnc bit purchase from Bits & Bits – https://bitsbits.com/
🌪️ – EF5 dust collector (use code JAY5 for 5% off) – http://bit.ly/2NlQ9ov
💲 – Save 10% on CMT saw blades at Taylor Toolworks with code CMT10 – https://lddy.no/qi2r
Jay — Nice collaboration to create the Matchfit Workhorse and accessories. I am planning to build a new workbench and am seriously thinking about using Matchfit dovetail clamps and accessories for work holding. I will see if I can come up with additional accessories. I will make a worktop with dovetail tracks to clamp in my Workmate 400 in any case.
Great ideas and execution!
Wow~! This is a really well thought out setup~! So simple, yet so versatile. I definitely plan to build one for myself. Even the “moxon block”. I’ve been searching around the web & comparing moxon vises to decide which one I want to build, but the block looks perfectly sufficient for what I’ll need.
Comments are closed.